UK flag English| Francaise flag Francaise | Espanol flag Espanol | Deutsch flag Deutsch | Bulgarian flag | Japanese flag Japanese | Russian flag Pyck
   
The logo of Isomatic Lab Ltd.
 

Products


Poke weld guns

The wide range of welding guns available with the Poke Welders ensures that there is always a gun suitable for the user requirements.

Welding Guns and non-standard welding electrode parts

A precision welders poke gun is suitable only for thin gauge materials. For special requirements like non-standard welding electrodes, special earth clamps or workshop trolleys please contact your nearest dealer.

Bearing in mind that all of the Poke gun range is suitable only for thin gauge materials (they are not recommended for car body work) select the gun best suited to your needs from the table.

All single sided guns (apart from the PG6), come fitted as standard with 1.5m cables and a Vise-Grip type earth clamp with copper jaws.

For special requirements, like longer leads, special earth clamps, non-standard welding electrodes or workshop trolleys contact with us.

PG1

PG1

PG2

PG2

PG2W

PG2W

The PG1 is the smallest single side gun. It can be fitted with a straight or 90 degree tip and has a built in switch.

The PG2 is the most widely used gun in the range. Easy to handle and with a conveniently placed switch it can be used for a wide variety of work.

The PG2W is a fully watercooled version of the PG2, allowing use under higher duty cycle conditions.

     

PG3

PG3

PG3W

PG3W

PG4

PG4

The PG3, (shown here with a roll spot wheel) takes a 13mm tapered electrode, ideal for medium duty work on heavier gauges than the PG2.

The PG3W is a fully watercooled version of the PG3, allowing use under higher duty cycle conditions.

The PG4 gun is designed as a series welder. This gun will apply 2 spots simultaneously and is ideal for fast operations or where attaching an earth can be difficult.
     

PG5

PG5

PG5M

PG5M

PG6

PG6

The PG5 is an ergonomically designed pliers gun, for use where access to thin gauge sheets (up to 0.5mm) is required.

The PG5M miniature pliers gun is the smallest in the range. Designed for use in the electronics industry, it offers a high degree of precision.

The PG6 is a heavy duty gun, fully watercooled and designed for use with watercooled cables. It will be used for thicker materials or high duty cycle applications.

 

 

 

 

 

 


Please, for contacts send mail to isomatic@isomatic.com.
Copyright 2009 Isomatic Lab Ltd.